Shortly after sending my iFi Audio Pro iCAN review unit back, iFi hit me up with its stealthy Micro iDSD BL (Black Label), a portable desktop DAC and pre-amp/headphone amp combo that packs a punch and goes head-to-head against the very popular Chord Electronics Mojo (If you see this Chord, I’d love a demo).

Much like the Pro iCAN, the iDSD BL is an iFi flagship product, but this time in its smaller portable/desktop Mirco line. Here again, iFi packs in strong feature sets bettered by trickle-down R&D and technology from iFi’s ultra-high-end parent company, Abbingdon Music Research, or AMR Audio.

You can read about all of the tech specs on iFi’s website, like the dual-core Burr-Brown DAC chips, custom Sanyo OP-Amps, and femto clock, so I’ll just get to the feedback you care about — user and listening impressions.

Unboxing Impressions

A relative newcomer to iFi products, I was happy to see the lesser-expensive iDSD BL comes well-packed in higher-end packaging with clean, minimalistic design and aesthetics like the Pro iCAN. It gives off the impression that you’re unboxing a much more expensive product. Inside, you’ll find a very comprehensive accessory set. Everything you need to put the iDSD BL to use is included: USB 3.0 cable, RCA cable, Optical/Toslink adapter, 3.5mm to 6.3mm headphone jack adapter, 3.5mm jumper, some other various USB adapters, a crushed velvet storage bag, a rubber mat to keep the iDSD BL from sliding around on various surfaces when in use, and two bands for securing the iDSD BL to your smartphone or DAP (you can even use the iDSD BL to charge your smartphone).

Despite its light weight, in hand, the iDSD BL has a sleek and solid feel. I’d say it’s comparatively robust next to products from JDS Labs and Schiit, and maybe a hair less robust than ALO and Chord’s offerings; however, I do have a couple of gripes. The black-on-black text on the chassis is hard to read, and the various recessed slide switches feel, well, cheap. In fact, the first time I slid the iEMatch switch into another position, the round plastic button popped off the switch post. The button easily went back on, but I’d prefer more solid switches on a unit at this price point. I can see these buttons easily popping off their posts if handled less that delicately when traveling. This nitpicking aside, the front panel toggle switches and volume pot operate nicely with good tactile feedback, and the overall look and feel of the device is quite pleasing.

As for being portable, yes, the 4800mAh lithium battery lets you use the iDSD BL on the go, but it’s long, narrow rectangular shape and overall length does make it rather awkward to carry. It’s approximately 1.5” longer than most standard smartphones when accounting for the volume knob and exposed inputs/outputs. In fact, it’s closer in size to the battery brick for my laptop, so this isn’t something I am tossing into a jacket pocket to use on the train each day. This becomes less of an issue if you carry a bag of some sort.

Sound Options

Perhaps the greatest traits of the iDSD BL are its flexibility and versatility. From sensitive IEMs to more power-hungry headphones, mixing and matching the Power Mode (Eco -
2.0V/500 mW @ 8 Ohm; Normal - 5.5V/1,900 mW @ 16 Ohm; Turbo - 10.0V/4,000 mW @ 16 Ohm) and proprietary iEMatch (Off, High-Sensitivity, Ultra-Sensitivity) settings allows you to dial in the right amount of power and gain to drive your music with balance and authority.

Because of a strong channel imbalance on the volume pot of my review unit, and my preference for lower listening levels while working, I found these variable settings incredibly useful for balancing the volume output for all of the headphones and IEMs in my collection. For example, I’m back to primarily using the Beyerdynamic Amiron Home as my home-office headphone, which was comfortably driven in just the Eco/High-Sensitivity settings, meaning the more powerful settings will get deafeningly loud.

Furthering its versatility, the iDSD BL also benefits from two proprietary circuitries — Xbass+ and 3D+ — that help correct some common headphone and loudspeaker shortcomings: sub-bass and imaging. While only “on” or “off” via two front panel toggle switches, instead of being active in varying degrees like on the Pro iCAN, these are still very usable EQ-like features.

XBass+ is iFi’s solution to bass deficiency in reference headphones and loudspeakers. Through analog signal processing circuitry, XBass+ provides a noticeable, although sometimes intrusive, bass boost. Much like my experience with the Pro iCAN, I was mostly pleased with how the bass boost integrated into the timbre of the amp, but results obviously vary by recording and headphone/loudspeaker selections. XBass+ nicely boosts the deep bass regions of the Sennheiser HD650, Beyerdynamic Amiron Home, and Focal Elear on bass-light recordings. With bass-shy headphones like my old AKG K701 or the updated Q701, XBass+ adds some welcomed warmth and impact. On the other hand, the dark and mysterious AudioQuest NightHawk (review), and the Fostex TH-600 gets boomy with Xbass+. The takeaway here is that you just have to experiment; XBass+ is not a set-it-and-forget-it option.

While XBass+ helps correct bass deficiency, 3D+ helps correct sound stage deficiencies, like that closed-in feeling when the sound is stuck right between your headphones. In other words, 3D+ was designed to create an “out-of-head” headphone listening experience that emulates listening to well-placed loudspeakers in a room.

Much like the XBass+ feature, 3D+ is rather hit-or-miss. I particularly liked this feature on the Pro iCAN, which had varying degrees of impact. On the iDSD BL, 3D+ is again “on” or “off” only, which limits its usability. In particular, I found 3D+ to work well with live recordings and videos, like Ben Howard’s 2015 Glastonbury Festival performance, where it widens the sound stage and makes for a more cohesive and deeper blending of sound. Testing it with the tracks I used in my Pro iCAN review, the 3D+ function again worked well enough with jazz classics like John Coltrane’s “Giant Steps” and Miles Davis’ “Kind of Blue” where instrument localization is very apparent and added depth and dimension enhances the experience. Admittedly though, some tracks get too busy and displaced with 3D+ engaged, especially when it has adverse effects in the treble region, injecting a strange artificial tizzy-ness to cymbals or an intrusive reverb effect to the entire track. Here again, it’s a feature that’s easily experimented with. Does it truly emulate properly positioned loudspeakers? No, but with the right tracks, it does make welcomed improvements to that “stuck in your head” feeling during long headphone sessions.


Toned Up

Coming from the Pro iCAN, which was surprisingly neutral and precise, I was expecting more of the same from the iDSD BL, but I was met instead with a tuning tipped towards warmer tones and marginally less precision in detail retrieval and treble clarity. It seems while the iDSD BL still seeks transparency, its tone plays it a bit safe, emphasizing more body in the bass and mids, probably for more versatility with headphone/IEM selection. I suspect this is also in part due to the tuning of the dual-core Burr-Brown DAC chips. For what it’s worth, the iDSD BL sounds more like the tube modes of the Pro iCAN than the solid-state section.

In comparison to my JDS Labs Objective2 headphone amp and OL DAC (review), the iDSD BL offers more bass impact and dimension, even without the XBass+ and 3D+ features engaged. However, the JDS stack takes the edge in neutrality and clarity, which is a touch dry in comparison, but perhaps more sonically accurate. I also still use an older ALO “The Island” at work, which comes off as much warmer and textured in comparison to both.

Overall, my takeaway is that the iDSD BL is relatively crisp and clear, with good bass impact and timbre, a touch rounded in the mids, but with nice dynamics, good space and dimension, and the right amount of treble and resolution for it to be hi-fi without being analytical.

Accuracy and neutrality are what come to mind with the Pro iCAN, which simply lacks a notable “house sound.” The iDSD BL moves a step back from its big sibling, adding a hint of coloration that gives it a touch of flavor for your desktop and portable needs. Add in the simple sound tweaks possible with XBass+ and 3D+ and you have a small amp/DAC that dishes out a darn good listening experience.

Parting Thoughts

Lastly, it’s well worth noting that the iDSD BL’s flexibility doesn’t stop with power and tone controls for your headphone listening sessions. The iDSD BL can serve as a DAC and pre-amp for your powered monitors, where XBass+ and 3D+ also work. It accepts USB and digital coax inputs (and optical/Toslink with the provided adapter) for greater input versatility. It natively plays all DSD, DXD, and PCM files, including Quad-DSD256, Octa-DSD512, and bit-perfect Double-DXD and PCM768. Consider all this on top of the innumerable headphones and IEMs that can be driven efficiently with the various Power Mode and iEMatch configurations and it’s clear that the iDSD BL offers scalability, flexibility, and performance well beyond its weight class.

It’s funny how things work out sometimes. Just before my annual spring/summer hiatus from pursuing #AudioNirvana, I decided to part ways with my Eddie Current Balancing Act amplifier, HiFiMAN HE-6 headphones, and Schiit Yggdrasil DAC as part of a downsizing, capital-raising, not-quite-sure-why-I-am-doing-this selling spree. During the process, the buyers of the HE-6 and Yggy both asked me how they would perform with iFi Audio’s Pro iCAN. Of course, I hadn’t the slightest idea because I had never used an iFi product in any of my personal audio systems. Ironically, the first product I am offered to audition this fall turns out to be the Pro iCAN. So, thank you Lawrance at iFi Audio; now I’ll be able to share some real opinions about this desktop headphone amp the next time someone asks.

Prior to this audition, my experience with iFi stretched as far as a brief audition of the original Micro iCAN at a friend’s and seeing several iFi products compared against Schiit Audio’s. Much like Schiit’s USA-made wares, UK-based iFi has made a mark in the computer audio and headphone scenes for its small, silver, affordable amps, DACs, and power-purifying devices. You’ll often see these two brands going head-to-head in debates on audio forums across the web. Aside from competing in the same spaces with similar products, there’s another reason why these two brands are so well regarded among their fan bases: Quality—both brands benefit from R&D by veterans of high-end audio manufacturers. It doesn’t seem often noted, but iFi’s parent company is Abbingdon Music Research, or AMR. AMR is regarded for making ultra-high-end, reference-class stereo amps, DACs, transports, and other hi-fi wares. The Spirited Uncle M actually cycles AMR’s DP-777 DAC through The Sound Lab on occasion, which I attest is one sweet piece of equipment. But I digress; my point is that iFi is able to later deploy tried-and-true technology from AMR at a fraction of the cost—enter the Pro series.

The Pro iCAN is iFi’s first flagship product released under the brand’s “Pro” or professional series line. Designed with some trickle-down technology from AMR, the Pro iCAN is iFi’s “studio-grade” headphone amp and preamp, chockfull of features not commonly found in desktop-sized amps, let alone ones priced at $1,699. I can see some iFi fans suffering from initial sticker shock, but this is a distinctly different product from anything iFi has put out before, and it brings far more value and flexibility than you’d first think.

You can read about all of the technically excellent details and specs—like the end-to-end, fully-balanced design, premium components, and incredible dynamic range—on iFi’s website, so I’ll just tell you about the features I liked most.

Tube Flavor

Do you like tube or solid-state sound? Don’t know? The Pro iCAN gives you a taste of both. The Pro iCAN houses individual solid-state and tube amplification sections. A switch on the front panel shifts the Pro iCAN between its Solid-State, Tube, and Tube+ modes, letting you select which circuit sounds best to your ears.

Solid-State mode is notably for you audio purists; employing a pure solid-state circuit using JFET transistors and a fully discrete, Class A power stage. Switching over to one of the two tube modes engages two top-grade General Electric 5670 tubes for an all-valve sonic presentation to give you that taste of tube flavor.


As a tube guy, I unsurprisingly preferred the Tube+ mode, which iFi says “reduces negative feedback to a minimum” and lets a “greater amount of the tubes’ natural harmonics” be produced. Still, I personally found the differences between the solid-state and tube circuits to be little more than subtle overall. My takeaway is that the Pro iCAN in Solid-State mode is crisp, clear, and precise. It has good reach and resolution without being overly dry or analytical. On the other hand, the 5670 tubes introduce a few degrees of mild but welcomed warmth and body to my ears. Bass lines and vocals seemed a touch richer and more involving, dynamics became a bit rounder and less pinpoint precise, and the sound stage opens up just ever so slightly, becoming a share wider and more holographic.

While clearly audible, I admit to wanting a greater sound variance between the different modes—more of that classic tube lushness, make-me-feel-euphoric goodness if you will—but the Pro iCAN remains a dialed and mostly analytical amp across the different modes. Don’t take this as a bad thing; iFi is clearly going for a notably resolving reference sound with the Pro iCAN—just don’t expect it to sound like three completely different amps by switching modes. I know this goes against what some other reviewers have touted, but I stand by my impressions that the solid-state and tube modes only let you subtly tweak the performance to best suit the gear and music you’re enjoying at the time.

In use, I also personally found the Pro iCAN’s wide dynamic range and sonic purity a challenge to describe in detail. Accuracy and neutrality are what come to mind most, which are pretty self-explanatory. Add in the amp’s ample power and the Pro iCAN is simply a lively performer that lacks any notable “house sound” coloration like my Eddie Current, Ray Samuels, and Woo Audio tube amps all had. Again, not a bad thing, just different. Neutrality and resolution in an amp can help a system’s synergy; by essentially getting out of the way, your sources, DACs, headphones, and speakers are given the opportunity to shine—providing they’re resolving enough.

That’s not to say the Pro iCAN is sonically boring. In fact, it’s quite engaging as it’s wide dynamic range and resolution draw out fine details and texture in the music that lesser spec’d amps gloss over. Add in the simple and surprisingly good sound tweaks for those that might need, scratch that, will need them, and you can an amp that packs a powerful punch.

Easy EQ

I generally let my system speak for itself, avoiding digital equalization tools and adjustments that alter the voicing of my gear. But the Pro iCAN packs two very usable EQ-like features into its compact chassis that are impossible to ignore. “XBass” and “3D Holographic” are two proprietary circuitries that help correct two common headphone and loudspeaker shortcomings: sub-bass and imaging.

XBass is iFi’s solution to bass deficiency in reference headphones and loudspeakers. Through analog signal processing circuitry, XBass provides a 12dB boost at the 10, 20, and 40Hz frequencies through a convenient front panel knob that lets you dial in the desired level of bass correction on the fly.

iFi says this implementation is not like traditional tone or loudness controls and is “sonically superior to Digital Signal Processing (DSP) systems.” I don’t know-how to confirm this in a meaningful way, but I can say that I was pleasantly surprised by how well the controlled bass boost integrated into the resolving timbre of the amp. Results obviously vary by recording frequencies and headphone/loudspeaker responses: XBass filled in the nether regions of my Sennheiser HD650 gloriously up to 20Hz but quickly made my AudioQuest NightHawk bloated and boomy with most recordings. XBass is likely more useful for filling out a headphone like the flatter responding AKG K701 or Q701.

Turning to the recording side of things, I found XBass most useful in combating tipped-up rock and anemic live recordings. And while it would have been nice to have varying levels of decibel boosts, the appeal of the 12dB XBass boost is that this easy-on, easy-off feature breathes visceral life into bass-light recordings and headphones/loudspeakers at the turn of a dial, which turns out to be something pretty nice to have—especially for us bassheads.


While XBass helps correct for bass deficiency, 3D Holographic for Headphones helps correct for imaging and sound stage deficiencies when listening to stereo recordings through headphones, meaning that closed-in feeling when the sound is stuck right between your ears. In other words, 3D Holographic was designed to create an “out-of-head” headphone listening experience that parallels listening to loudspeakers in a normal room.

This is something other manufacturers have tried to achieve with software plug-ins and crossfeed features, but as iFi explains, 3D Holographic for Headphones “is not based on a standard crossfeed system, as found in some high-end headphone amplifiers. Many so-called ‘3D systems’ are usually DSP based that artificially effect the sound and add unwanted reverb in order to simulate a ‘spacious’ type of sound.

“It’s true that traditional crossfeed tends to produce an ‘out-of-head’ sound, but with much diminished spatial components and a narrower soundstage,” iFi continues, adding that these implementations often produce “unnatural, echo-like sound, which may initially be impressive, but soon becomes tiring.” By contrast, iFi claims 3D Holographic for Headphones, which was developed based on research extending back to the 1980s, is the first system in commercial production to achieve the desirable out-of-head imaging rendered without added reverb.

Because the Pro iCAN is the first amp I have tried with a feature of this kind, all I’m willing to say is that I generally liked whatever was happening when turning the 3D Holographic front panel dial from off to the 30°, 60°, and 90° Loudspeaker Angle settings. Much like the XBass feature, 3D Holographic has varying degrees of impact. In particular, I found 3D Holographic to gradually widen the sound stage in each increment, especially with must-own jazz classics like John Coltrane’s “Giant Steps” and Miles Davis’ “Kind of Blue” where instrument localization is often strongly apparent. Studio recordings by Ben Howard and John Mayer’s various live albums also gained noticeably more depth and dimension by cranking the dial, although electronic tracks from the likes of Bonobo and Moderat seemed to benefit in lesser degrees.

During my time with the Pro iCAN, I often found myself cranking the 3D Holographic dial all the way to the 90° setting for the fun of it, which created a more lively listening experience at the expense of some precision. The 90° setting generally gushed with the greatest sense of space and width, moving the sound stage from dead center in my head to the edges of my ears. Admittedly, some tracks can get too busy and displaced sounding in this mode and in some instances cymbals and strings tacked on a strange artificial sounding tizzy-ness. So, it’s safe to say results will vary—implement as needed. As a guy who also has a listening room with a loudspeaker setup, I won’t say that 3D Holographic truly emulates properly positioned loudspeakers, but it takes welcomed and major steps in incrementally making headphones far more bearable and spatially believable, especially during long listening sessions when that “stuck in your head” feeling gets fatiguing.

Heady Options

Lastly, as I own and audition a lot of different headphones and IEMs with different types of cables, I thoroughly like the flexibility and scalability packed into the Pro iCAN. Never have I had a headphone amp that had every jack I needed, let alone one that could play well with every headphone or IEM I threw at it. The Pro iCAN never failed to impress here.

Armed with a host of balanced (3.5mm TRRS, two x 6.3mm, two x 3-pin XLR, and 4-pin XLR) and unbalanced (3.5mm and 6.3mm) headphone outputs, outside of some exotic cable types, the Pro iCAN has compatibility covered.

Better even, regardless of whether I had a sensitive IEM or a power-hungry full-size headphone connected, there was absolutely zero background noise or that annoying gain hiss—even in Tube mode with the volume knob cranked to the max.

What’s more, the Pro iCAN pumps out up to 20V via its balanced outputs, which is equivalent to 100W into a 4 Ohm speaker. Pair this ample power with the variable gain stages (0dB, +9dB, +18dB) and the Pro iCAN easily drives just about every headphone on the market with accuracy and ease—including the venerable HiFiMAN HE-6 and AKG K1000.

Parting Thought

With plenty of single-ended and balanced inputs and outputs, pretty much every headphone jack you could ever need, a ton of power, a few unique tone-tweaking features, great specs, and packed-in premium components, the Pro iCAN packs a powerful punch, offering scalability, flexibility, and performance. Oh, and it sounds darn good. If you’re already an iFi fan, you’ll undoubtedly like the Pro iCAN. If you’ve never tried an iFi product, the Pro iCAN is unlikely to disappoint. Without a doubt iFi’s flagship Pro iCAN is a headphone amp and pre-amp I can live with.